All my bike repairs and services are performed to a very high standard, You will be inform of any issues with your bike, prior to the completion of the bike servicing. As one of the most experienced & longstanding cycle specialists in the area, I am capable of servicing & repairing all brands & types of bike. Electric bikes are welcome. I am also more than happy to advise you on the best service for your bike if you are unsure and also give you a more accurate costing if brought in.
The bike is stripped to a bare frame. Seat post removed, cleaned & regreased. B/B removed, cleaned & threads tapped if necessary. Headset removed & replaced if necessary. Mech hanger alignment. Hubs serviced, bearings inspected & replaced if necessary. Wheels fully serviced, cleaned, inspected and trued. Tyres inspected, cleaned & set to the correct pressure, Bars retaped if requested / necessary. New cables fitted, The bike is rebuilt using high grade greases & oils.
Basic bike clean. Frame inspection. Wheels inspected, trued and retension, tyres inflated to recommended pressure. Hubs, headset and bottom bracket inspected, regreased & adjusted / replaced if necessary. Seat post removed cleaned and re-greased. Disc brake bleed if necessary. If present Suspension inspected, lubed & pressures checked. Frame linkage / welds / luges inspected.
Gear indexing & lube, Brake adjustment / setup & pivots lubed. All cables checked, Tyres set to correct pressure. Bike will have a safety check.
Single workshop jobs are available, such as inner tube fitting, accessory fitting, single parts fitting etc.
Prices starting from just £8
I also offer specialist work such as Wheel building, Brake bleeding, Suspension fork, shock servicing (Fox & Rockshox only), Thread cutting & repairs. Helicoiling. Bearing removal & fitting.
Rounded & snapped nut / bolt Removal, Bottle cage rivnut fitting.
Facing & reaming of headtubes & bottom brackets (one of the causes of premature bearing faile
This work is priced at £35 per hour.
Any customers needing carbon fibre repairs, I highly recommend 'HQ Fibre Products' located in Lingwood.
Parts needed for servicing are not covered under any of the workshop prices shown above, Any parts required will be extra but agreed with the customer before being fitted.
All Work is carried out in house by myself. No work is ever outsource or completed by a third party.
Mag parts tray